Turn Mini Blinds Into Pretty Roman Shades

0
Spread The LoveShare on FacebookTweet about this on TwitterPin on PinterestEmail this to someone

Turn mini blinds into beautiful roman shades all on your own (video below)!

You’ll need:

  • White faux wood blinds (found at your local home improvement store)
  • Thick upholstery fabric
  • Pencil
  • Scissors
  • Decoupage
  • Bowl for decoupage
  • Foam brush
  • Clothespins
  • Tape measure
  • Iron

[H/T: Better Homes & Gardens]

roman shades 3

 

First, figure out how long your blinds need to be. Using a large work area, lay out the blind facing down and pull them out to the length of the window. Snip away only the ladder strings on both sides; this is the string that connects the slats. Whatever you do, don’t remove the lift cord, this is what moves the roman shade up and down.

roman shades 4

 

The slats will need to be seven inches apart. Divide the length of your window in inches by seven to determine how many slats you’ll need. Snap off the slats you don’t need.

Lay out the fabric beneath the blinds and space out the remaining slats evenly, about seven inches apart, which will provide nice folds in the final shade.

roman shades 5

 

The fabric should extend beyond the slats about two inches and about two inches on the top and bottom. Iron the edges to form a clean hem.

The blind operation should be at the back. Start at the top, pop out the stopper on the end of the top bracket, and notch the fabric so it wraps nicely around the end. Coat both bracket and the fabric with glue called decoupage medium (decoupage medium dries clear).

roman shades 7

 

Wrap the fabric around the top bracket. Use clothespins to clamp while it dries. Glue the fabric around onto the backside of the slats where you marked the slat placement before. You just need to glue the edges on the front and back, not the whole slat.

roman shades six

 

Place clothespins on the edges of the slats to ensure those areas adhere nicely. Roll the edge of the fabric over so you get a clean edge. Glue into place, wrap the fabric around the bottom bar, and clamp with clothespins.

Let dry completely before hanging. Install like normal mini blinds. And the best part is, they are operational like normal blinds but much prettier.

 

Video:

Share.

Comments are closed.